Band & Orchestra Repair

At our service center, we will repair your instrument with professional care and respect.
WOODWIND | BRASS | STRINGS 

Woodwind Repair

We service all woodwind instruments: flutes, clarinets, saxophones, oboes, bassoon, etc. From key adjustments to complete re-pads and bodywork, our skilled repair technicians will do what it takes to get your instrument playing at its best.

Complete Repad & Mechanical Overhaul

Saxophone

  • Disassemble instrument
  • Remove all pads, key corks/felts, and neck cork
  • Ultrasonically clean instrument, keys, and neck in a safe biodegradable solution
  • Straighten and swedge keys
  • Check pad cups for flatness
  • Fit pivot screws/posts
  • Perfect toneholes
  • Fit neck and receiver
  • Straighten body (if necessary) and remove any minor dents
  • Reassemble with new synthetic key corks/felts, premium pads, and your choice of resonators
  • Play test and adjust for intonation and response.


Clarinet

  • Disassemble instrument
  • Remove all pads, key corks/felts, and tenon corks
  • Polish keywork
  • Ultrasonically clean keywork
  • Clean and bore oil wood instruments
  • Straighten and swedge keys
  • Fit pivot screws/posts
  • Install teflon inserts on specific keys
  • Reassemble with new synthetic key corks/felts, tenon corks, and synthetic Valentino and Omni pads
  • Play test and adjust for intonation and response.

  • Add cork pads to top joint for an additional charge


Flute & Piccolo

  • Disassemble instrument
  • Remove all pads, key corks/felts, and crown cork
  • Ultrasonically clean instrument and keys
  • Polish body, head, and keywork
  • Straighten and swedge keys
  • Fit pivot screws/posts
  • Perfect toneholes
  • Straighten body (if necessary) and remove any minor dents
  • Reassemble with new synthetic key corks/felts, premium pads, and fit/seal new crown cork
  • Play test and adjust for intonation and response.

  • Valentino synthetic pads are used on Piccolos

Brass Repair

From dent removal, valve and slide maintenance, to professional cleaning our shop prides itself on professional work.

Magnetic and Traditional Dent Removal
We use the Magnetic Dent Removal System (MDRS) to remove dents from areas that our traditional tools will not reach without un-soldering joints. It is a great addition to our collection of tools, and especially effective on large brass and saxophone bows.

Polishing Raw Brass
We can hand polish (without buffing) raw brass or raw nickel instruments. Any instrument that is not lacquered will eventually become tarnished.

Ultrasonic Cleaning
Our service center is equipped with a 90 gallon Ultrasonic Cleaner. Ultrasonic cleaning is an innovative method of cleaning musical instruments through the use of high frequency sound waves and a biodegradable, environmentally friendly cleaning solution. Transducers mounted in the tank create tiny bubbles which clean and scrub the entire instrument in a safer, more thorough manner than traditional mechanical or chemical cleaning methods.

Ultrasonic Flush and Clean

  • Disassemble horn
  • Remove all corks, felts, water-key pads, rotor bumpers, etc.
  • Clean instrument in Ultrasonic cleaner, using ultra-safe biodegradable cleaner
  • We then use air powered nylon brushes to clean the interior of the instrument and slide tubes
  • Pistons, rotors, and slide tubes are polished
  • Measure valve/rotor port alignment and check with borescope
  • Reassemble horn with new corks, felts, synthetic water-key pads, orange silicone rotor bumpers, etc.

Orchestral Strings Repair

Jacob Bowles, our head string instrument repair technician, was trained at the Chicago School of Violin Making. Jacob oversees the orchestra string repair services for our company using the skills and knowledge he acquired from his years of experience as a luthier.

Bow Rehair

  • We use the best white hair.
  • The bow will be carefully disassembled, cleaned and, where appropriate, gently polished, taking care not to induce undue wear.
  • The camber of the bow and the fit of the working parts will be assessed and discussed with the owner if necessary.
  • A quantity of hair appropriate to the bow and the owner’s wishes will be picked and counted out by hand, removing any with detectable faults. Typically in this picking process we will discard 5% to 15% of the hair we receive.
  • Once the hair is inserted into the bow it will be left to dry for a time in order to gauge the length before the final fitting of the spreader wedge and the finishing of the rehair.
  • The working parts will be lubricated before the bow is returned to its owner.
  • Only at the owner’s request, we will apply a first coat of rosin to the bow.

Bridge Replacement
Bridges are cut from maple blanks. Each instrument has a unique shape and the bridge has to be cut to fit the curve of that top. Bridges are tuned by carving out areas that carry the sound from the bridge top through the feet and into the instrument, where the soundpost transmits the vibrations to the back. Lasting for decades, a good bridge should provide great tone and comfort for the player.

Call or come by the store to set up an appointment for your instrument.

  • Facebook
  • Twitter
  • Youtube
  • Instagram
  • Pinterest

Image